Error 649

Error 649.  The account does not have permission to dial-in.

Resolution:
1) This error can occur if the user name is the same as the domain name.
2) This error can occur if the username is 'system'.
3) This error can occur if dialing in to a Windows NT Remote Access Server and your password has expired.
4) Make sure the user is allowed to dial-in.
5) Check PPTP filtering. For the test, disable PPTP filtering on the server (Net Stop RASPPTPF), and see if you can establish a non-filtered connection.

  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking...

Error 741

Error 741 - The local computer does not support the required encryption type1. Make...

Error 734

Error 734 - The PPP link control protocol terminated.Resolutions: 1. this is most like security...

Error 783

Error 783 - Can't enable ICSSymptom: When you try to enable ICS, you may receive the following...

Error 809

This error is most frequent for mobile Internet users whose dataplan expired or ran out of...