Error 650

Error 650:  The Remote Access server is not responding.

Resolution:
1) Proxy or firewall block like port 1723 and IP GRE 74.
2) Check the server type and uncheck most of them.
3) Make sure you type correct information in logon screen.
4) Check PPTP filtering. For the test, disable PPTP filtering on the server (Net Stop RASPPTPF), and see if you can establish a non-filtered connection.

  • 132 Users Found This Useful
Was this answer helpful?

Related Articles

Error 741

Error 741 - The local computer does not support the required encryption type1. Make...

Error 734

Error 734 - The PPP link control protocol terminated.Resolutions: 1. this is most like security...

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 783

Error 783 - Can't enable ICSSymptom: When you try to enable ICS, you may receive the following...