Error 650

Error 650:  The Remote Access server is not responding.

Resolution:
1) Proxy or firewall block like port 1723 and IP GRE 74.
2) Check the server type and uncheck most of them.
3) Make sure you type correct information in logon screen.
4) Check PPTP filtering. For the test, disable PPTP filtering on the server (Net Stop RASPPTPF), and see if you can establish a non-filtered connection.

  • 133 أعضاء وجدوا هذه المقالة مفيدة
هل كانت المقالة مفيدة ؟

مقالات مشابهة

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 633

Error 633 Modem Is Already in Use Symptoms: When you try to use your modem on a Windows...

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...