Error 650

Error 650:  The Remote Access server is not responding.

Resolution:
1) Proxy or firewall block like port 1723 and IP GRE 74.
2) Check the server type and uncheck most of them.
3) Make sure you type correct information in logon screen.
4) Check PPTP filtering. For the test, disable PPTP filtering on the server (Net Stop RASPPTPF), and see if you can establish a non-filtered connection.

  • 133 Utilisateurs l'ont trouvée utile
Cette réponse était-elle pertinente?

Articles connexes

Error 735

Error 735 - The requested address was rejected by server.Make sure you don't setup static IP on...

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...