Error 650

Error 650:  The Remote Access server is not responding.

Resolution:
1) Proxy or firewall block like port 1723 and IP GRE 74.
2) Check the server type and uncheck most of them.
3) Make sure you type correct information in logon screen.
4) Check PPTP filtering. For the test, disable PPTP filtering on the server (Net Stop RASPPTPF), and see if you can establish a non-filtered connection.

  • 133 Usuários acharam útil
Esta resposta lhe foi útil?

Artigos Relacionados

Error 629

Error 629 - The port was disconnected by the remote machine (also re: error 913).Check lists:1)...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....