Error 650

Error 650:  The Remote Access server is not responding.

Resolution:
1) Proxy or firewall block like port 1723 and IP GRE 74.
2) Check the server type and uncheck most of them.
3) Make sure you type correct information in logon screen.
4) Check PPTP filtering. For the test, disable PPTP filtering on the server (Net Stop RASPPTPF), and see if you can establish a non-filtered connection.

  • 133 Los Usuarios han Encontrado Esto Útil
¿Fue útil la respuesta?

Artículos Relacionados

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...

Error 735

Error 735 - The requested address was rejected by server.Make sure you don't setup static IP on...

Error 807

Most likely your virus filter or firewall application is blocking your VPN access. Known...

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers...