Error 650

Error 650:  The Remote Access server is not responding.

Resolution:
1) Proxy or firewall block like port 1723 and IP GRE 74.
2) Check the server type and uncheck most of them.
3) Make sure you type correct information in logon screen.
4) Check PPTP filtering. For the test, disable PPTP filtering on the server (Net Stop RASPPTPF), and see if you can establish a non-filtered connection.

  • 133 Bu dökümanı faydalı bulan kullanıcılar:
Bu cevap yeterince yardımcı oldu mu?

İlgili diğer dökümanlar

Error 736

Error 736 - The remote computer terminated the control protocol.1. This error indicated that the...

Error 783

Error 783 - Can't enable ICSSymptom: When you try to enable ICS, you may receive the following...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...