Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 أعضاء وجدوا هذه المقالة مفيدة
هل كانت المقالة مفيدة ؟

مقالات مشابهة

Error 735

Error 735 - The requested address was rejected by server.Make sure you don't setup static IP on...

Error 783

Error 783 - Can't enable ICSSymptom: When you try to enable ICS, you may receive the following...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 629

Error 629 - The port was disconnected by the remote machine (also re: error 913).Check lists:1)...