Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Users Found This Useful
這篇文章有幫助嗎?

相關文章

Error 792

Error 792 -   The L2TP Connection Attempt failed because security negotiation timed out.Causes:...

Error 678

Error 678: There was not answer.Resolution:1) you are dialing the wrong number.2) make...

Error 937

Error 937: Because another connection of your type is in use.Cause: W2K/XP limits one VPN...

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...

Error 783

Error 783 - Can't enable ICSSymptom: When you try to enable ICS, you may receive the following...