Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Uživatelům pomohlo
Byla tato odpověď nápomocná?

Související články

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...

Error 650

Error 650:  The Remote Access server is not responding.Resolution:1) Proxy or firewall block like...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...