Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 2 Kunder som kunne bruge dette svar
Hjalp dette svar dig?

Relaterede artikler

Error 807

Most likely your virus filter or firewall application is blocking your VPN access. Known...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers...

Error 781

Error 781 - Encryption FailedSymptom: When connecting to a VPN server, you may receive this Error...

Error 735

Error 735 - The requested address was rejected by server.Make sure you don't setup static IP on...

Error 721

Error 721: Remote PPP peer or computer is not responding.Resolution: If you have tried many thing...