Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 gebruikers vonden dit artikel nuttig
Was dit antwoord nuttig?

Gerelateerde artikelen

Error 937

Error 937: Because another connection of your type is in use.Cause: W2K/XP limits one VPN...

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 682

Error 682:  When VPN clients try to remotely log on to your network, they may be denied access....

Error 792

Error 792 -   The L2TP Connection Attempt failed because security negotiation timed out.Causes:...