Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Benutzer fanden dies hilfreich
War diese Antwort hilfreich?

Verwandte Artikel

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 768

Error 768 - The connection attempt failed because of failure to encrypt dataCause: the VPN server...

Error 721

Error 721: Remote PPP peer or computer is not responding.Resolution: If you have tried many thing...

Error 792

Error 792 -   The L2TP Connection Attempt failed because security negotiation timed out.Causes:...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers...