Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 A felhasználók hasznosnak találták ezt
Hasznosnak találta ezt a választ?

Kapcsolódó cikkek

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 807

Most likely your virus filter or firewall application is blocking your VPN access. Known...

Error 736

Error 736 - The remote computer terminated the control protocol.1. This error indicated that the...

Error 629

Error 629 - The port was disconnected by the remote machine (also re: error 913).Check lists:1)...