Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Utenti hanno trovato utile questa risposta
Hai trovato utile questa risposta?

Articoli Correlati

Error 691

Error 691: Access denied because username and/or password is invalid on the domain.Resolution:1)...

Error 735

Error 735 - The requested address was rejected by server.Make sure you don't setup static IP on...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 806

Error 806:  a connection between your computer and the VPN server has been established...

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking...