Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Корисниците го најдоа ова како корисно
Дали Ви помогна овој одговор?

Понудени резултати

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers...

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...

Error 797

Error 797 -  The modem could not be found.Resolutions:1. Rebooting the machine that may solve the...