Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 brukere syntes dette svaret var til hjelp
Var dette svaret til hjelp?

Relaterte artikler

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 800

Error 800: Unable to establish the VPN connection. The VPN server may be un-reachable, or...

Error 937

Error 937: Because another connection of your type is in use.Cause: W2K/XP limits one VPN...

Error 736

Error 736 - The remote computer terminated the control protocol.1. This error indicated that the...

Error 682

Error 682:  When VPN clients try to remotely log on to your network, they may be denied access....