Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Usuários acharam útil
Esta resposta lhe foi útil?

Artigos Relacionados

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...

Error 650

Error 650:  The Remote Access server is not responding.Resolution:1) Proxy or firewall block like...

Error 633

Error 633 Modem Is Already in Use Symptoms: When you try to use your modem on a Windows...

Error 807

Most likely your virus filter or firewall application is blocking your VPN access. Known...

Error 735

Error 735 - The requested address was rejected by server.Make sure you don't setup static IP on...