Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Utilizadores acharam útil
Esta resposta foi útil?

Artigos Relacionados

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 682

Error 682:  When VPN clients try to remotely log on to your network, they may be denied access....

Error 678

Error 678: There was not answer.Resolution:1) you are dialing the wrong number.2) make...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...