Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 utilizatori au considerat informaţia utilă
Răspunsul a fost util?

Articole similare

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 629

Error 629 - The port was disconnected by the remote machine (also re: error 913).Check lists:1)...

Error 736

Error 736 - The remote computer terminated the control protocol.1. This error indicated that the...

Error 781

Error 781 - Encryption FailedSymptom: When connecting to a VPN server, you may receive this Error...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers...