Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Пользователи нашли это полезным
Помог ли вам данный ответ?

Связанные статьи

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...

Error 741

Error 741 - The local computer does not support the required encryption type1. Make...

Error 768

Error 768 - The connection attempt failed because of failure to encrypt dataCause: the VPN server...

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking...

Error 650

Error 650:  The Remote Access server is not responding.Resolution:1) Proxy or firewall block like...