Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Los Usuarios han Encontrado Esto Útil
¿Fue útil la respuesta?

Artículos Relacionados

Error 650

Error 650:  The Remote Access server is not responding.Resolution:1) Proxy or firewall block like...

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 691

Error 691: Access denied because username and/or password is invalid on the domain.Resolution:1)...

Error 624

Error 624:  Cannot update the phonebook file.Resolutions: 1)  Make sure that RASPHONE.PBK is...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers...