Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 2 användare blev hjälpta av detta svar
Hjälpte svaret dig?

Relaterade artiklar

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...

Error 807

Most likely your virus filter or firewall application is blocking your VPN access. Known...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 682

Error 682:  When VPN clients try to remotely log on to your network, they may be denied access....

Error 633

Error 633 Modem Is Already in Use Symptoms: When you try to use your modem on a Windows...