Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The Routing and Remote Access service terminated with service-specific error 711" and Event ID: 7024  in the System Event log of the server shows. This behavior may occur because the Routing and Remote Access Service is unable to start if the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service are disabled.

RESOLUTION: to resolve this behavior, you must use the Services Administrative tool to set the Startup Type of all the Remote Access Connection Manager service, Remote Access Auto Connection Manager, and the Telephony service to Manual.. After you have made these settings, you can restart the Routing and Remote Access Service.

  • 3 Користувачі, які знайшли це корисним
Ця відповідь Вам допомогла?

Схожі статті

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 629

Error 629 - The port was disconnected by the remote machine (also re: error 913).Check lists:1)...

Error 691

Error 691: Access denied because username and/or password is invalid on the domain.Resolution:1)...

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...