Error 720

Error 720: No PPP control protocols configured.

Resolution:
1) make sure both RAS server and client have the correct protocol setup.
2) make sure the NetBIOS interface has being installed and the NetBIOS binding has being enabled. The NetBIOS interface is required for establishing logical names and sessions on the network for Windows NT/9x/ME.

  • 134 Users Found This Useful
Was this answer helpful?

Related Articles

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 797

Error 797 -  The modem could not be found.Resolutions:1. Rebooting the machine that may solve the...

Error 809

This error is most frequent for mobile Internet users whose dataplan expired or ran out of...

Error 937

Error 937: Because another connection of your type is in use.Cause: W2K/XP limits one VPN...