Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server.

Resolution:
1) Ensure that the TCP/IP protocol is installed on your RAS server and that the TCP/IP protocol is selected in the Server Settings of the Network Configuration option of the Remote Access Setup dialog.
2) If you have the "Use DHCP to assign remote TCP/IP client addresses" option selected for the TCP/IP protocol in the RAS Server Settings, then ensure that you have installed DHCP and that it is not disabled.
3) Ensure that all of the bindings for TCP/IP are enabled in the Bindings tab of the Network dialog of the Control Panel. Be sure to inspect the TCP/IP Protocol and WINS Client (TCP/IP) bindings for all adapters, all protocols, and all services. If the TCP/IP bindings are corrupt, you may have to reinstall TCP/IP and or RAS in order to clean up the bindings.

  • 1 Kasutajad peavad seda kasulikuks
Kas see vastus oli kasulik?

Seotud artiklid

Error 792

Error 792 -   The L2TP Connection Attempt failed because security negotiation timed out.Causes:...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 682

Error 682:  When VPN clients try to remotely log on to your network, they may be denied access....