Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server.

1) Ensure that the TCP/IP protocol is installed on your RAS server and that the TCP/IP protocol is selected in the Server Settings of the Network Configuration option of the Remote Access Setup dialog.
2) If you have the "Use DHCP to assign remote TCP/IP client addresses" option selected for the TCP/IP protocol in the RAS Server Settings, then ensure that you have installed DHCP and that it is not disabled.
3) Ensure that all of the bindings for TCP/IP are enabled in the Bindings tab of the Network dialog of the Control Panel. Be sure to inspect the TCP/IP Protocol and WINS Client (TCP/IP) bindings for all adapters, all protocols, and all services. If the TCP/IP bindings are corrupt, you may have to reinstall TCP/IP and or RAS in order to clean up the bindings.

  • 1 Користувачі, які знайшли це корисним
Ця відповідь Вам допомогла?

Схожі статті

Error 736

Error 736 - The remote computer terminated the control protocol.1. This error indicated that the...

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...

Error 721

Error 721: Remote PPP peer or computer is not responding.Resolution: If you have tried many thing...