Error 806

Error 806:  a connection between your computer and the VPN server has been established but the VPN connection cannot be completed.  The most common cause for this is that there is at least one internet device between your computer and the VPN server is not configured to allow GRE protocol packets Verify that protocol 47 GRE is allowed on all personal firewall devices or routers.  if the problem persists, contact your administrator.

A firewall or your ISP is blocking your VPN access. Please try connecting with both PPTP and L2TP. Please also see the similar error 807.

Resolutions:
1) if you have a router/firewall, make sure you open TCP Port 1723, IP Protocol 47 (GRE).
2) make sure you can reach the VPN server by using ping.  Sometimes, poor connection can cause this issue too.
3) You may need to updated firmware on a router or firewall.
4) The VPN server may not be able to get IP from DHCP for the VPN client. So, you may want to re-configure VPN host networking settings. For XP pro VPN host, go to the Properties of the VPN>Network, check Specify TCP/IP address and Allow calling computer to specify its own IP address, and uncheck Assign TCP/IP addresses automatically using DHCP.
5) Make sure other secure software blocks your access, for example, if you use Norton secure software, you may need to add the remote client's IP so that the client can access.
6) If your VPN running on a Windows RRAS with NAT enabled, you may want to check the NAT settings.

  • 3 Korisnici koji smatraju članak korisnim
Je li Vam ovaj odgovor pomogao?

Vezani članci

Error 734

Error 734 - The PPP link control protocol terminated.Resolutions: 1. this is most like security...

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 768

Error 768 - The connection attempt failed because of failure to encrypt dataCause: the VPN server...

Error 930

Error 930:  The authentication server did not respond to authentication requests in a...

Error 650

Error 650:  The Remote Access server is not responding.Resolution:1) Proxy or firewall block like...