Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers only (also re:  Error 629  and 645). The event viewer may also generate the following event:
Event ID: 20188
Source: RemoteAccess
Description: The user username, attempting to connect on port, was disconnected because of the following reason:
A Remote Access Client attempted to connect over a port that was reserved for Routers only.

Resolutions:
1) Enable Remote access connections. To do this, go to Routing and Remote Access administrative tool>Ports>Properties, click the appropriate port (L2TP, Modem, PPTP, LPT1, and so on), and then click Configure, and then check the Remote access connections (inbound only).
2) Double-click the "Incoming Connections" icon on network connections folder and make sure "Allow VPN Connections" is enabled.

  • 9 gebruikers vonden dit artikel nuttig
Was dit antwoord nuttig?

Gerelateerde artikelen

Error 741

Error 741 - The local computer does not support the required encryption type1. Make...

Error 649

Error 649.  The account does not have permission to dial-in.Resolution:1) This error can occur if...

Error 930

Error 930:  The authentication server did not respond to authentication requests in a...

Error 809

This error is most frequent for mobile Internet users whose dataplan expired or ran out of...

Error 678

Error 678: There was not answer.Resolution:1) you are dialing the wrong number.2) make...