Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers only (also re:  Error 629  and 645). The event viewer may also generate the following event:
Event ID: 20188
Source: RemoteAccess
Description: The user username, attempting to connect on port, was disconnected because of the following reason:
A Remote Access Client attempted to connect over a port that was reserved for Routers only.

Resolutions:
1) Enable Remote access connections. To do this, go to Routing and Remote Access administrative tool>Ports>Properties, click the appropriate port (L2TP, Modem, PPTP, LPT1, and so on), and then click Configure, and then check the Remote access connections (inbound only).
2) Double-click the "Incoming Connections" icon on network connections folder and make sure "Allow VPN Connections" is enabled.

  • 9 Користувачі, які знайшли це корисним
Ця відповідь Вам допомогла?

Схожі статті

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 633

Error 633 Modem Is Already in Use Symptoms: When you try to use your modem on a Windows...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking...

Error 807

Most likely your virus filter or firewall application is blocking your VPN access. Known...