Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer before it could be completed.  This is most likely a modem or phone line noise issue or blocking port issue.

Resolutions:
1) make sure you have good phone line.
2) Upgrade the modem/router firmware
3) Make sure you logon using the correct username or password or try different username.
4) Reinstall the modem.
5) Re-enable RAS
6) Check the router/firewall settings.
7) Make sure the router is VPN pass through or GRE is enabled.

  • 15 Users Found This Useful
Was this answer helpful?

Related Articles

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 735

Error 735 - The requested address was rejected by server.Make sure you don't setup static IP on...

Error 937

Error 937: Because another connection of your type is in use.Cause: W2K/XP limits one VPN...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The...