Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

Error 735

Error 735 - The requested address was rejected by server.Make sure you don't setup static IP on...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 930

Error 930:  The authentication server did not respond to authentication requests in a...

Error 721

Error 721: Remote PPP peer or computer is not responding.Resolution: If you have tried many thing...

Error 633

Error 633 Modem Is Already in Use Symptoms: When you try to use your modem on a Windows...