Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 0 Els usuaris han Trobat Això Útil
Ha estat útil la resposta?

Articles Relacionats

Error 800

Error 800: Unable to establish the VPN connection. The VPN server may be un-reachable, or...

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking...

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 624

Error 624:  Cannot update the phonebook file.Resolutions: 1)  Make sure that RASPHONE.PBK is...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....