Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 0 Kunder som kunne bruge dette svar
Hjalp dette svar dig?

Relaterede artikler

Error 691

Error 691: Access denied because username and/or password is invalid on the domain.Resolution:1)...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 781

Error 781 - Encryption FailedSymptom: When connecting to a VPN server, you may receive this Error...

Error 806

Error 806:  a connection between your computer and the VPN server has been established...