Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 2 Users Found This Useful
Was this answer helpful?

Related Articles

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 633

Error 633 Modem Is Already in Use Symptoms: When you try to use your modem on a Windows...

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...

Error 650

Error 650:  The Remote Access server is not responding.Resolution:1) Proxy or firewall block like...

Error 792

Error 792 -   The L2TP Connection Attempt failed because security negotiation timed out.Causes:...