Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 2 Utenti hanno trovato utile questa risposta
Hai trovato utile questa risposta?

Articoli Correlati

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The...

Error 792

Error 792 -   The L2TP Connection Attempt failed because security negotiation timed out.Causes:...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....