Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 2 brukere syntes dette svaret var til hjelp
Var dette svaret til hjelp?

Relaterte artikler

Error 741

Error 741 - The local computer does not support the required encryption type1. Make...

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The...

Error 633

Error 633 Modem Is Already in Use Symptoms: When you try to use your modem on a Windows...