Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 2 Usuários acharam útil
Esta resposta lhe foi útil?

Artigos Relacionados

Error 735

Error 735 - The requested address was rejected by server.Make sure you don't setup static IP on...

Error 783

Error 783 - Can't enable ICSSymptom: When you try to enable ICS, you may receive the following...

Error 633

Error 633 Modem Is Already in Use Symptoms: When you try to use your modem on a Windows...

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The...

Error 781

Error 781 - Encryption FailedSymptom: When connecting to a VPN server, you may receive this Error...