Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 0 Пользователи нашли это полезным
Помог ли вам данный ответ?

Связанные статьи

Error 783

Error 783 - Can't enable ICSSymptom: When you try to enable ICS, you may receive the following...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 650

Error 650:  The Remote Access server is not responding.Resolution:1) Proxy or firewall block like...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 741

Error 741 - The local computer does not support the required encryption type1. Make...