Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 0 Los Usuarios han Encontrado Esto Útil
¿Fue útil la respuesta?

Artículos Relacionados

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The...

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 624

Error 624:  Cannot update the phonebook file.Resolutions: 1)  Make sure that RASPHONE.PBK is...

Error 629

Error 629 - The port was disconnected by the remote machine (also re: error 913).Check lists:1)...