Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 0 Bu dökümanı faydalı bulan kullanıcılar:
Bu cevap yeterince yardımcı oldu mu?

İlgili diğer dökümanlar

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking...

Error 624

Error 624:  Cannot update the phonebook file.Resolutions: 1)  Make sure that RASPHONE.PBK is...

Error 633

Error 633 Modem Is Already in Use Symptoms: When you try to use your modem on a Windows...

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive "The...

Error 734

Error 734 - The PPP link control protocol terminated.Resolutions: 1. this is most like security...