Error 630

Error 630 - The port was disconnected due to hardware failure

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
2. Check  if your modem is being given a bad init string - with a command that it does not support.
3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.
4. Reboot your computer and try it again.
5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.
6. Update the modem drivers.

  • 0 Користувачі, які знайшли це корисним
Ця відповідь Вам допомогла?

Схожі статті

Error 650

Error 650:  The Remote Access server is not responding.Resolution:1) Proxy or firewall block like...

Error 783

Error 783 - Can't enable ICSSymptom: When you try to enable ICS, you may receive the following...

Error 937

Error 937: Because another connection of your type is in use.Cause: W2K/XP limits one VPN...

Error 800

Error 800: Unable to establish the VPN connection. The VPN server may be un-reachable, or...

Error 721

Error 721: Remote PPP peer or computer is not responding.Resolution: If you have tried many thing...