Error 633

Error 633 Modem Is Already in Use

Symptoms: When you try to use your modem on a Windows computer, you may receive an error message similar to the following: Error 633 Modem is already in use, or is not configured for Remote Access dial out or The port is in use.

Resolutions: 1. Verify  no other applications that are using the modem. You can open  Task Manager to check that by press  CTRL+ALT+DEL.  Another way to test it is reboot the computer.
2. This behavior may occur when another device with a driver,  for example outdated Palm Pilot software, conflicts with the modem. 
3. Telephone.ini or unimdm.tsp is missing or damaged.
4. Make sure the modem is setup correctly and may apply SP.
5. Removing and reinstalling it, or  apply the new drive may fix the problem.
6. Make sure no two ISDN installed on the same machine and attempt to connect to the same server.

  • 1 brukere syntes dette svaret var til hjelp
Var dette svaret til hjelp?

Relaterte artikler

Error 732

Error 732: The PPP negotiation is not converging.Cause:1. The negotiation of PPP...

Error 789

This is an L2TP error. Try to use PPTP instead. If you are using VISTA, please make sure that you...

Error 721

Error 721: Remote PPP peer or computer is not responding.Resolution: If you have tried many thing...

Error 720

Error 720: No PPP control protocols configured.Resolution:1) make sure both RAS server and client...

Error 650

Error 650:  The Remote Access server is not responding.Resolution:1) Proxy or firewall block like...