Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for Routers only (also re:  Error 629  and 645). The event viewer may also generate the following event:
Event ID: 20188
Source: RemoteAccess
Description: The user username, attempting to connect on port, was disconnected because of the following reason:
A Remote Access Client attempted to connect over a port that was reserved for Routers only.

Resolutions:
1) Enable Remote access connections. To do this, go to Routing and Remote Access administrative tool>Ports>Properties, click the appropriate port (L2TP, Modem, PPTP, LPT1, and so on), and then click Configure, and then check the Remote access connections (inbound only).
2) Double-click the "Incoming Connections" icon on network connections folder and make sure "Allow VPN Connections" is enabled.

  • 8 Users Found This Useful
Was this answer helpful?

Related Articles

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 624

Error 624:  Cannot update the phonebook file.Resolutions: 1)  Make sure that RASPHONE.PBK is...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 629

Error 629 - The port was disconnected by the remote machine (also re: error 913).Check lists:1)...

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...