Error 930

Error 930:  The authentication server did not respond to authentication requests in a timely fashion.

SYMPTOMS: after setup Routing and Remote Access service for VPN or dial-up on a server to use RADIUS, or upgrade the server to a new OS, 1) the client computers may receive the following error message: Error 930: The authentication server did not respond to authentication requests in a timely fashion. 2) On the RRAS server Event ID: 20073 The following error occurred in the Point-to-Point Protocol module port: Port, UserName: Username. The authentication server did not respond to authentication requests in a timely fashion. 3) On the IAS server, the following error message may be reported Event ID: 13 A request was received from the invalid client IP Address IP_Address.

Causes: 1) The default path to the Remote Access log file has been changed or is not valid.
2) The VPN server has not been set up as a RADIUS client in the IAS.
3) This behavior will occur if the VPN user has permissions to read only on the Active Directory directory service record.
4) Refer to error 619 resolution - add the vpn to the appropriate group.

  • 1 Users Found This Useful
Was this answer helpful?

Related Articles

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete the...

Error 624

Error 624:  Cannot update the phonebook file.Resolutions: 1)  Make sure that RASPHONE.PBK is...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 629

Error 629 - The port was disconnected by the remote machine (also re: error 913).Check lists:1)...

Error 630

Error 630 - The port was disconnected due to hardware failure1. Check that the modem is...